 |
NLG Analytical offer the full range of HTA Autosamplers for GC, HPLC and Automated SPE applications. Hta has created a workstation that can execute all the operations for liquid handling and sample preparation in an automatic and efficient manner. It is very accurate, precise and fast. It is also elegant, good looking, innovative, flexible and low cost.
For fast and flexible HPLC Autosamplers visit http://www.nlg-analytical.co.uk/hplcandgc.php
Request a catalogue
View Online
HT200H Headspace Autosampler
HT250D Liquid GC & Headspace Duet Autosampler
HT300A Liquid GC Autosampler
HT400E Automated SPE
Autosampler Homepage
|
|
|
The HT200H is a headspace autosampler made to meet the needs of
static Headspace injection for GC analysis. It operates with all major
GC systems including Agilent, Shimadzu, Varian and many more.
The elegant swivel head design mimics the actions of manual injection and removes the need for transfer lines.
Clips of the HT200H in use
Mounting directly on your GC, The HT200H does not use any
benchspace. It is also one of the most economical headspace samplers
around.
The HT200H is easily installed on all major GCs. The tray can be mounted on either side.
Easy Setup:
The instrument is controlled by a user friendly keypad (placed on the base), or by a PC using the HT-COMSoft Software. Installation is simple and the results exceptional.
The HT200H eliminates tubing, dead volume and sample absorption. The
injection tower transports vials to the 6 position incubator for
orbital agitation at the programmed temperature. The heated syringe
then samples the headspace and injects directly into the GC.
After injection, the 2.5 or 5ml syringe is purged with inert gas.
The swivel head design allows the injection port to be used for manual
injections at any time.
For maximum productivity, the HT200H processes samples so that injections start immediately after the previous run is completed.
Key Features:
• No transfer lines means no sample crossover
• Rotating head design leaves injection port free for manual injection
• Progressive sample transfer means samples always ready when previous run completed
• May be configured for left or right operation
• Variable fill speed allows for wide range of sample viscosities
• Variable dwell time for temperature equilibration with column
| headspace operation |
| Shaking Method: |
Orbital |
| Incubation Oven: |
6 position |
| Syringe Sizes: |
2.5, 5ml |
| Tray Capacity: |
40 Vials, 10 or 20ml |
| Cleaning System: |
Nitrogen flush |
| GC Compatibility: |
Agilent/HP 4890
Agilent/HP 5890
Agilent/HP 6850A
Agilent/HP 6890
Carlo Erba 5300 Mega
Carlo Erba 8000
Carlo Erba 8000 Top
Carlo Erba 8500 Mega 2
Chemito 1000
Chrompack CP9001/2
Dani 8610/8500
Donam DS6200
Gow Mac*
Kristallux 4000M |
Meta Chrom*
Perkin Elmer XL
Shimadzu GC-14A/B/C
Shimadzu GC-17A
Shimadzu GC-2010
Shimadzu GC-2014
Shimadzu QP-2010
SRI 8610*
Trace SX
Varian 3300/3400
Varian 3800
Varian 3900
Younglin*
* Only if specified when ordering the GC |
|
| Conditioning |
| Oven Temperature: |
40 - 150°C |
| Time: |
0 - 23h 59m |
| Progressive Increase: |
0 - 9h 59m |
| Shaker Speed: |
320 - 720rpm |
| Shaking Cycles On/Off: |
0 - 9.9mins |
| Sampling |
| Syringe Temperature: |
40 - 150°C |
| Pre-fill Volume: |
Steps of 0.01ml |
| Pull Up Strokes: |
Up to 15 Strokes |
| Equilibrium Delay: |
Up to 60secs |
| Sampling Volume: |
Steps of 0.01ml |
| Filling Speed: |
0.1 - 100ml/min |
| Injection |
| Sampling Repeats: |
Up to 15 |
| Waiting Time between Samples: |
0 - 99mins |
| Injection Speed: |
0.1 - 100ml/min |
Waiting Time
(before and after injection): |
0 - 99secs |
| Physical Characteristics |
| Dimensions (W x H x D): |
420 x 620 x 400mm |
| Mass: |
11.5kg |
Datasheet
 HT200H Datasheet (793KB)
|
